Monday, June 16, 2014

Sources: Marine Aquaculture-Lombok, NTB. 2005

Sources: Marine Aquaculture-Lombok, NTB. 2005Water quality factors shall not constitute an obstacle if the area is an area of ​​grouper culture. Another case in the new location, there should be an approach to the measurement of water quality parameters as well as the action that is both simple test if it does not have a water quality measuring device that is by maintaining some tail shells of abalone in the area, at least aKakakdewa.com Agen Judi Bola Resmi Taruhan Judi online Terpercaya bout 2-4 weeks ( about 1 month), and the parameters measured were able to survive and eat the feed given. It will serve as a benchmark that the site has been able to support the cultivation of abalone shells.3.3. Design and KnstruksiDesign and construction should be designed in such a way to form a proper construction for the cultivation of abalone shells. Things to consider is the strength of construction, durability and cost of construction. We could have made a very sturdy construction using strong materials, such as stainless steel (staenless), but the cost should not little. For entrepreneurs who have substantial capital, it is not a problem but for the people who earn pretty sure this will be a problem.At KJA more identical method on water in a protected location, in the sense that instead of the open sea and shipping lanes. Design and construction KJA generally the same, but are often made of different sizes. This certainly tergantug on the capacity of the make.The materials for the framework as well as the raft floats used also KAISARBET.COM AGEN BOLA TERPERCAYA PIALA DUNIA 2014vary, but the principle is the same, namely to preserve life to be able to obtain adequate results. Such as, the use of the framework of bamboo or wooden raft. The most important thing in choosing a raft of construction materials is strength, resistance to water (does not easily rot) and the affordable purchase price. Similarly, the use of buoys, such as drums painted stainless steel, or plastics drums of material wrapped strofoam, but in principle only to float cage. In selecting and determining the number of buoys must take into account buoyancy or weight-bearing capacity of the heavy load carried and so it is not easy to sink.

Figure 7. Kermba Construction Floating Net (KJA)The raft which had been finished and ready should immediately be placed in locations that have been selected. The initial step is the placement of a raft of most anchor placement in advance and after the raft to the location of cultivation, other anchors may be placed at a predetermined position.Placement of the first anchor portion intended as a starting point the position of the cage while the other anchor as a regulator of the direction of the cage. Cages to be installed if more than one unit, the position or direction of the cage should be opposite to the wave direction, aiming to avoid the blows of the surface area.

GudangPoker.com  Situs Judi Poker Online Terbaik TerpercayaAs with the installation of 1 unit cage in a location, this consideration does not need to be done. placement of the cages for some units can be seen in the image below:

0 comments:

Post a Comment